Part Material Size (T x W x L*) Qty.

Top

Top maple 2" x 20" x 34" 1
End caps maple 1 1/2" x 2" x 20" 2
Rod plugs maple dowel 1" dia. x 1" 8
Threaded top rods plated steel 3/8" dia. x 19" 4
Nuts plated steel 3/8" dia. 8
Flat washers plated steel 3/8" dia. 8

Base

Legs maple 2" x 2" x 32" 4
End skirts maple 3/4" x 4" x 16" 2
Back skirt maple 3/4" x 4" x 31" 1
Knife block brace maple 3/4" x 1 1/2" x 16" 1
Crossbraces maple 1" x 2" x 18" 4
Shelf slats maple 1" x 1 1/2" x 36" 7
Drawer runner cleats maple 7/8" x 1 1/2" x 14" 2
Drawer runners aluminum angle 3/4" x 3/4" x 14" 2
Casters heavy-duty, rubber-edged 4

Drawer

Drawer front maple 3/4" x 4" x 29" 1
Drawer sides maple 3/4" x 4" x 16 5/8" 2
Drawer back maple 3/4" x 3 1/2" x 28" 1
Drawer bottom plywood 1/4" x 16 1/4" x 28" 1
Stop block cleat maple 1/2" x 1" x 4" 1
Drawer pull brass Lee Valley 01A44.11 1

Knife block

Block strips maple 2" x 5" x 8 5
Knockdown bolts 50 mm Lee Valley 00N16.50 3
Threaded inserts 20 mm Lee Valley 00N11.20 3

Wine rack

Rack slats maple 3/4" x 1 1/2" x 36" 2
Rack front/back maple 3/4" x 3" x 19" 2
Rack sides maple 3/4" x 3" x 9" 2
Rack bottom slats maple 1" x 3/4" x 19" 4



* Length indicates grain direction

Recommended Tools


Export date: Fri Mar 29 8:56:51 2024 / +0000 GMT

This page was exported from Canadian Home Workshop [ https://canadianhomeworkshop.com ]