Part	Material	Size (T x W x L*)	Qty.

For each benchtop
Top strips	maple	1 3/8" x 2 1/2" x 54"	13
Back apron	maple	1" x 4" x 55 1/2"	1
Front apron	maple	1" x 4" x 54 3/4"	1
Right end cap	maple	1 3/8" x 5" x 20"	1
End vise jaw	maple	2 1/2" 5" x 20"	1
Left end cap	maple	2 1/2" x 4" x 30 3/4"	1
Splines	plywood	1/2" x 1" x 18"**	2
Vise arm	maple	3 1/4" x 4" x 20 1/2"	1
Vise block	Baltic birch plywood	3" x 6 1/4" x 7 1/2"	1
Vise guide	maple	3/4" x 4" x 7 1/2"	1
Shoulder vise board	jatoba	1" x 4" x 11 1/2"	1
Vise accent	jatoba	1/4" x 6 3/4" x 7 1/2"	1
Large vise (LV #70G08.02 )	Lee Valley Large Front Vise		1
Shoulder vise screw (LV #70G01.51)	Lee Valley Should Vise Screw		1
Vise handles (LV #05G12.03)	Lee Valley Tail Vise Handles		2
Threaded rod	plated steel	3/8"-diameter x 16 1/4"	1
Washers and nuts	plated steel	3/8"-diameter	2

For the leg assemblies
Left foot	maple	2 3/8" x 4 1/2" x 30"	1
Right foot	maple	2 3/8" x 4 1/2" x 23"	1
Legs	maple	1 7/8" x 3" x 27 1/2"	4
Left front leg	maple	1 7/8" x 2 1/2" x 27 1/2"	1
Left top rail	maple	1 7/8" x 2" x 29 3/4"	1
Right top rail	maple	1 7/8" x 2" x 18 1/2"	1
Tenon dowels	cherry	1/4"-diameter x 1"	15

For the drawer unit
Top and bottom	maple ply	3/4" x 15 3/4" x 38 1/2"	2
Sides	maple ply	3/4" x 15 3/4" x 5 1/2"	2
Side edge accents	jatoba	1/4" x 3/8" x 15 3/4"	4
Side stiffeners	maple ply	3/4" x 14 3/4" x 4 1/2"	2
Edge caps	maple	1/4" x 3/4" x 5"** 4	4
Partitions	maple ply	3/4" x 14 3/4" x 5"	2
Back	maple ply	3/4" x 4 1/2" x 37 1/2"	1
Drawer runners	maple	1/8" x 3/4" x 15"	6
Stile caps	maple	5/8" x 1 1/8" x 6"	4
Rail caps	maple	5/8" x 3/4" x 36 3/4"	4
Supports	maple	1" x 2" x 10 1/2"	4
Outside drawer fronts	maple	5/8" x 4 7/16" x 10 7/16"	2
Centre drawer front	maple	5/8" x 4 7/16" x 15 11/16"	1
Ouside drawer boxes	hardwood	4 5/16" x 9 11/16" x 14 3/4"***	2
Centre drawer box	hardwood	4 5/16" x 14 15/16" x 14 3/4"***	1
Drawer pulls	jatoba	3/4" x 1" x 6 1/2"	3
Top accent rails	jatoba	1/2" x 1/2" x 39"	2

**Cut to length required. ***H x W x L

* Length indicates grain direction